MPS-1910
3U Rack Mounted Module Chassis
The MPS-1910 is a 3U tall- (12) slot 19" wide rack chassis unit. The rack chassis can house ten modules consisting of any combination of the 3HE Plug-in versions of the MPS-2320TX Transmitters and MPS-2320RX Receivers.
The MPS-1910 also provides, as an option, two (2) dedicated rack chassis slots for a supervisory alarm monitor and auxiliary channel input and output ports. The rack chassis accomodates two (2) hot-swappable, auto-ranging power supplies. The On/Off switch and fused AC input are located on the rear panel.
A unique feature of this chassis is the recessed front panel area providing a sheltered cable bend radii area for routing Fiber and RF cables accross the front of the plugin modules without extending past the 19" equiptment rack. There is also a pass-thru end slot to conduit any cables to the rear of the rack through the chassis.
Applications
- Ultra-Wideband RF Transmission
- Antenna Remoting
- Delay Lines
- C & X Band SATCOM
- RADAR, EW & ECM
- Lightweight Aluminum Construction
- Powdercoated Exterior Finish
- Status Monitoring: RS-232 (opt)
- EIA Standard EIA-310-D Rack Mounting
- Cable Plenum Hood extends 3" infront of Module Faceplates
- Front to Rear Cable Pass-thru Slot
Specifications
Parameters
| Spec | Value |
|---|---|
| Dimensions | 17.3"W x 10.6"D x 5.2"H, 19" Front Panel |
| Weight | 6.7 Lbs. |
| Total Available Slots | 12 Eurocard |
| Available System | 3HE Plug-ins, qty (10), alarm/aux. ch. slots, qty |
| Configurations | (2) |
| Connectors | DIN 41612 on backplane RF-sma on modules Optic-SC on modules |
| Input Supply (rear panel) | 85 VAC - 264 VAC, 47 Hz - 63 Hz |
| Internal Bus Supply | 13.8 V (MAX 3A) |
| Temperature Range | Storage: -40ºC to +70ºC, Operating: -25ºC to +65ºC |
| Standard Conformity | CE |
